WEDOLiT^® Forming Lubricants

WEDOLiT® FS 3310

Delivers uniform wetting and smooth sliding with stable load capacity, reducing friction and wear to extend tool life while producing clean, dimensionally accurate surfaces, supported by a fast-evaporating, low-residue film that often eliminates extra cleaning and is easily removable with solvents or alkaline cleaners.

Solvent base

Stamping, Bending, Straightening

1,8

>56

StSSAl | NF

EN

WEDOLiT® FS 3100

A low-viscosity, non-water-soluble synthetic evaporating forming oil for punching and bending of steel and non-ferrous metals, delivering very good wetting and a thin, fast-evaporating residue-free film (so no additional cleaning is needed), while providing an integrated cleaning effect and completely odourless application by spray, flood, brush, or roller.

Evaporating forming oil

Punching, Bending

2

>55

StAl | NF

WEDOLiT® FW 3500

Offers excellent high-pressure performance with high application stability, low foaming, good skin compatibility, and extended tool life, for hydroforming processes (internal/external high-pressure forming of steel plates) and for grinding and cooling operations. Approved by FF Fluid Forming.

Water-soluble, fully synthetic

Hydroforming

4,7

St

WEDOLiT® FS 3710

Delivers good wetting and is nearly odourless, combining strong lubrication with quick evaporation and a high flash point (ensure sufficient ventilation due to volatile hydrocarbons), for drawing and punching operations of aluminium, applied undiluted by spraying, flooding, brushing, or rolling.

Evaporating drawing oil

Stamping, Bending

3,9

+

>56

StSSAl | NF

WEDOLiT® FS 3910

Delivers optimal, even wetting with a spreading and cleaning effect, is practically odourless, and features very fast evaporation with a high flash point, applied undiluted by spraying, flooding, brushing, or rolling for low-viscosity, non-water-soluble punching and bending of steel and zinc-coated steel (not suitable for non-ferrous metals).

Neat Cutting and Bending Oil

Stamping, Bending

7,4

+

>61

StSS

WEDOLiT® FS-4101

Offers excellent spreading for uniform wetting, stable load-carrying and smooth sliding, and reduced friction and wear for long tool life and clean, dimensionally accurate surfaces, with a fast-evaporating, nearly residue-free film that often eliminates extra cleaning (or is easily removable).

Evaporating forming oil

Stamping, Bending

1,9

+

>65

StSSAl | NF

WEDOLiT® FS-4512

Solvent

Stamping

>65

StSSAl | NF

WEDOLiT® FS-4700

Offers uniform wetting through excellent spreading, stable load-carrying and smooth sliding, and reduced friction and wear for long tool life while delivering clean, dimensionally accurate surfaces.

Evaporating forming oil

Stamping, Bending, Calibrating

1,6

>65

StSSAl | NF

WEDOLiT® FS 4710

Delivers uniform wetting with stable load-carrying and smooth sliding, reducing friction and wear for long tool life while producing clean, dimensionally accurate surfaces, with a fast-evaporating, low-residue film that often eliminates additional cleaning (or is easily removable with solvents/alkaline cleaners).

Solvent base

Stamping, Bending

4,9

+

>66

StSSAl | NF

WEDOLiT® FS 6311

Proveides uniform wetting with stable load-carrying and smooth sliding, reducing friction and wear for long tool life while ensuring clean, dimensionally accurate surfaces, with a fast-evaporating, low-residue film that often eliminates additional cleaning (or is easily removable with solvents/alkaline cleaners).

Evaporating forming oil

Stamping, Forming

3,9

>80

StSSAl | NF

WEDOLiT® FS-8100

Delivers excellent wetting and a fast-evaporating, residue-free film, combining reliable lubrication with effective cleaning (also for rinsing/cleaning in washing machines) and almost odourless application by spray, flood, brush, or roller.

Evaporating forming and cleaning oil

Punching, Bending, Solvent Cleaner

3,5

>100

StAl | NF

WEDOLiT® FS 8111

A low-viscosity, non-water-miscible cooling lubricant with synthetic additives for punching and bending steel and non-ferrous metals, offering excellent wetting and cleaning with a fast-evaporating, near residue-free film that often eliminates additional cleaning, is almost odourless, and can also be used for rinsing and washing-machine cleaning of metal surfaces.

Evaporating forming oil

Stamping

4

>101

StSSAl | NF

WEDOLiT® CN 5200-28

Solvent

MQL

75

>190

StSSAl | NF

WEDOLiT® FN-1430-60

Syn

Assembly Oil

>160

StSSAl | NF

WEDOLiT® FN 1470-300

A medium-viscosity, water-insoluble, environmentally compatible fully synthetic forming oil for stainless steel, steel, and non-ferrous alloys, used undiluted, easily removable with common solvents or alkaline cleaners, requiring no degreasing before annealing, and evaporating residue-free above 300 °C without staining or coking.

Forming Oil

HD forming (cold ext.wire, fine blanking)

295

>160

StSS

WEDOLiT® FN 1850-9

A mineral oil-based, chlorine-containing high-performance cold-forming lubricant for small-diameter drawing, delivering reliable cold-start performance, excellent wetting and film formation without stick-slip, stable load-bearing capacity for clean, dimensionally accurate surfaces, and easy removal with conventional cleaners.

Forming Oil

Forming / Drawing

9,2

+

>130

St

WEDOLiT® FN 1872-50

A water-insoluble, reactive drawing oil based on special phosphoric acid esters that forms an iron phosphate layer on iron and steel, is free of chlorine, sulphur, and nitrites, and provides short-term corrosion protection (up to a few days).

Reactive drawing oil

Reactive Forming

22

n.d

StFE

WEDOLiT® FN 4170-35

A low-viscosity, water-insoluble, chlorinated lubricant for heavy forming of steel and stainless steel, combining EP additives for outstanding precision cutting performance and applied undiluted by spray, dip, brush, or roller.

Chlorinated stamping oil

HD Forming / Drawing

36

++

>150

StSSAl | NF

WEDOLiT® FN 4455-25

A low-viscosity, water-insoluble lubricant for medium to heavy forming of steel and non-ferrous metals, with EP additives for outstanding precision cutting performance, applied undiluted by spray, dip, brush, or roller.

Forming and stamping oil

HD Forming / Stamping

25

+++

>165

StSS

WEDOLiT® FN 4455-55

A low-viscosity, water-insoluble lubricant for heavy forming of steel and non-ferrous metals, combining EP additives for outstanding precision cutting performance and applied undiluted by spraying, dipping, brushing, or rolling.

Chlorine free stamping oil

HD Forming / Drawing

55

+++

>165

StSS

WEDOLiT® FN 6870-170

A medium-viscosity, water-insoluble forming lubricant for steel (e.g., automotive body applications), offering reliable deep-drawing performance and spot lubrication for thread cutting or blind-hole drilling, applied undiluted by spraying, dipping, brushing, or roller.

Forming Oil

Deep Drawing, Forming, Spot Lube

175

++

>160

St

WEDOLiT® FN 6870-440

A high-performance, highly refined mineral-oil-based lubricant for heavy forming and machining of steel, stainless steel, and aluminium (e.g., thread cutting, stamping, and deep drawing).

High performance forming oil

HD Forming

444

+++

>150

StSSAl | NF

WEDOLiT® FW 6550-165

A synthetic, mineral oil- and chlorine-free punching and forming fluid with a high EP additive content, delivering a pressure-resistant lubricating film even in demanding machining operations.

Stamping and Forming Medium

Deep Drawing

165

+++

>160

StAl | NF

WEDOLiT® FW 9114

A medium-viscosity, water-insoluble lubricant for deep drawing and other cold-forming of steel (e.g., auto bodies), also ideal for spot lubrication in thread cutting or blind-hole drilling, applied undiluted by spray, dip, brush, or roller.

Forming Oil

Deep Drawing

not measurable

++

160

St